ValetPRO pH Neutral Snow Foam
ValetPRO's pH Neutral Snow Foam is an outstanding, safe pre-wash product designed for regular maintenance washes. It will remove bugs and traffic film with ease, and will deliver an effective and wax safe wash every time. Loosen contamination before washing with pH Neutral Snow Foam to help reduce marring.
Features:
- Produces thick, clingy foam
- Safe on all surfaces
- pH neutral formula
- Safe to use on ceramic coatings, waxes and sealants
- Gentle and effective
Directions for Use:
1. Snow Foam Lance
- Dilute 1:3 to 1:9 in a foam lance (recommended: 100ml product to 900ml water)
- Apply to the entire vehicle
- Allow to dwell but do not allow to dry
- Rinse thoroughly, starting from the bottom
Trade dilution alternative: 300ml product to 700ml water
100ml product and 900ml water with pressure washer feed set to maximum will use the full 1 litre per vehicle. When washing multiple cars, this adds unecessary work. Using 300ml product to 700ml water gives greater control. Increase or decrease the feed depending on the foam thickness you require to wash 2–3 vehicles per litre.
2. Pump Sprayer
- Dilute 1:10 to 1:20 in a pump sprayer
- Apply product to lower panels, wheels, wheel arches, etc.
- Once you have sprayed to all areas, begin rinsing from where you started
- Do not allow to dry - product works best when kept wet (in warmer weather, you may not be able to apply to whole car before rinsing)
- Rinse thoroughly from the bottom up