Koch-Chemie GP6.01 Gelcoat One Cut Polishing Compound

1-step machine polish for all gelcoat and boat paint colours for the permanent removal of polishing haze, holograms and scratches with a simultaneous sealing effect. Gelcoat One Cut is economical, easy to polish and easy to wipe off and therefore has an optimum ratio of abrasiveness and gloss for economical and effective work in marine refinishing.

In addition, the polish produces a brilliant and durable high-gloss finish even on difficult, dark colours. Contains carnauba wax and non-volatile silicones and thus protects against chalking and weathering.

Areas of Use

Removal of polishing haze, holograms and scratches with a simultaneous sealing effect on gelcoats and boat paints.

Recommendations for Use

Can be applied using an eccentric polishing machine. Spread 5 pea-sized drops onto a suitable polishing Pad (One Cut Pad) and work in a crosswise motion. Spread the product onto the surface at low speed and then process at the highest speed.

Buff out the polish and remove any remaining polish with a Polish & Sealing Towel. Subsequent sealing is not necessary due to the wax components contained in the product. Shake before use. Check for material compatibility before use. Do not use on hot surfaces. 

Warnings

Protect from frost and excessive heat. Do not use on unpainted plastics and rubber. May cause an allergic skin reaction. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Avoid breathing vapours or spray. Wear protective gloves.