Colourlock Cabrio Colour Set

The Cabrio Colour Set from Colourlock offers a professional solution for refreshing and recolouring faded and discoloured textile convertible tops. The set includes all the necessary products, including the soft top cleaner, the matching colour refresher and the final textile impregnation. This enables efficient and long-lasting restoration of the convertible top's original appearance.

Kit Contains

• 1x Pol Star (100ml)
• 1x Allround Textile Sealant (500ml)
• 1x Crosslinker (50ml)
• 1x Nubuck Fresh (1 Litre)
• 1x Spray Bottle
• 1x Coating Towel
• 3x Cleaning and application sponge
• 2x Nitrile Gloves
• 1x Synthetic Leather Brush

Recommended use: Pour the contents of Pol Star into the empty clear spray bottle, and fill completely with warm water and screw on the spray head. Spray the dry or slightly damp soft top evenly in a place protected from the sun, and work the cleaner in evenly with the Synthetic Leather brush. Leave to dwell for 5 - 10 minutes, but do not allow to dry. Repeat the cleaning process if necessary. Afterwards, rinse the soft top thoroughly with clean water (preferably a high-pressure cleaner) until no dirt or cleaning agent remains. Allow the soft top to dry completely.

Cover or mask off any areas that are not to be coloured, if necessary. Shake Nubuck Fresh thoroughly and mix 300ml with 2% (6ml) Crosslinker, then divide the soft top into several sections and dye them one after the other so that no area remains untreated. Work the Nubuck Fresh mixture evenly into the soft top with the application sponge. Allow the soft top to dry completely after applying the paint.

Before sealing, make sure the surface is between 10℃ and 40℃. Cover or mask off any areas that are not to be sealed, if necessary. Spray the Allrounder Textile Sealant generously onto a microfibre cloth, and spread evenly and thinly over the entire soft top, ensuring that all areas are completely covered and worked in. Allow the soft top to dry for at least 24 hours – no rain or moisture during this time.

Clean the soft top gently after sealing to encourage long-lasting protection. Refresh the protection when its effects wear off by reapplying. Use enough material – too little leads to uneven and blotchy results.

Warnings: Test all products on a concealed area first to rule out possible changes. Wear suitable protective gloves during all work steps.