CARPRO ALLiN All-In-1-Step Polishing Compound

ALLiN is CARPRO's new all-in-one polishing compound, designed and engineered to offer extreme cutting and finishing power with added hydrophobic protection in one easy step.

ALLiN is a water-based, one-step vehicle correction polish. It removes defects up to 2500-grit sanding haze while delivering high clarity, gloss, and a hydrophobic base layer of protection.

For jobs where a full multi-stage correction isn't the goal, ALLiN collapses cut, polish and base hydrophobic protection into one pass: a faster route to a corrected, protected finish for time-limited jobs, mobile details, or single-stage enhancements. DA machines only.

Preparation

• Heavy Defects: Use a CARPRO Ultra Pad for harder paint or deeper scratches.
• Light Defects: Use a CARPRO Orange Pad for softer paint or finishing.
• Priming: Condition the pad and apply 3 to 4 pea-sized drops of product.

Application

• Section: Work within a 40×40 cm (16×16 inch) area.
• Machine: Use a dual-action polisher at speed 3.5 to 4.
• Movement: Guide the machine in a cross-hatch pattern with zero pressure.
• Cycle: Polish until the polish residue turns completely clear.
• Removal: Wipe away the residue using a clean, plush microfibre towel.
• Maintenance: Clean the pad between sets to maintain cutting efficiency.

Curing & Possible Next Steps

• Standalone: Leave as-is for base protection. Full water repellency cures in 24h.
• Topping: Maintain or boost protection using CARPRO Reload, Elixir, or HydrO2.
• Coating Prep: To apply a ceramic coating, perform a dedicated panel wipe with CARPRO Eraser to ensure the surface is completely oil-free.

View this post on Instagram

A post shared by Slim's Detailing (@slimsdetailing)